close email sign-up pop-up
SLEIGH THE SHOPPING LIST // SHOP THE BADASS GIFT GUIDE
GerberGear
Gerber Magniplier Replacement Carbide Cutter Kit
Gerber Magniplier Replacement Carbide Cutter Kit

NEW Magniplier Carbide Cutter Replacement Kit

  •  
$18
Item: # 30-001565

With regular use and exposure to the elements, it is inevitable that certain parts of any tool will need a refresh. Extend the life of your pliers with the Magniplier Replacement Kit, equipped with carbide cutter replacement parts.

Currently Out of Stock

QUESTIONS? Contact Gerber

Details:

    • Exchangeable + reversible carbide cutters
  • Warranty

Additional Versions:

Carbide Cutter Replacement

  • For optimal alignment, remove the fastener tips and set aside. Remove the used cutters from the free handle & lock handle& discard. With the tips removed, position the [2] new cutters onto the free handle & lock handle.*Avoid pinch points between cutters & plier jaws during removal & re-installation. Contact may cause injury.
  • Continue lightly squeezing both handles together & first tighten the free handle cutter fastener,torque to 3.5 KG-CM[3.03 LB-IN].*Take care not to over torque & strip the head of the fastener.
  • Continue lightly squeezing both handles together & look at the lock handle cutter to confirm it is still correctly “set” [confirm alignment to the free handle cutter].*When set there shall be 0.00 mm gap at the anvil & cutting edge contact point.
  • Continue lightly squeezing both handles together & then tighten the lock handle cutter fastener, torque to 3.50 KG-CM[3.03 LB-IN].*Take care not to over torque & strip the head of the fastener.
  • Lightly squeeze the handles; confirm there is no gap between the cutting & anvil edge contact point. *If a gap is present, remove both the cutters & cutters fasteners. Re-start carbide cutter installation steps.
  • Make sure no gap along the entire cutting edge when holding pliers closed.

Download instructions here.

Technology Image

CRUSH IT

Not all pliers are created equal, some are just overachievers. The Magnipliers are optimized for swift power with BearHand Control™, an ergonomic control system: optimized space between handles, off axis shape for line of sight, and a finger choil that mimics a trigger grip.

  1. Exchangeable jaw tips w/ outboard fasteners
  2. Exchangeable/reversible carbide cutters
  3. Plunge lock
  4. Angled shape/off axis
  5. Tether point to secure [lanyard included]
  6. Optimized space between handles for maximum control
  7. Finger choil
You Might Also Like
Reviews
Write A Review
Give us your opinion
Please, fill all fields.
Too long review. Limit is 1023 characters.

Thank You

Thank You. Your review will be displayed after it is accepted. Note: Reviews are only moderated for foul language and negative interactions among reviewers.